Pneumatic Staple 120 PSI - T50

Contact safety mechanism for safe firing. Adjustable exhaust cover directs air away from user. Bump fire capability for fast firing. Max pressure 10 PSI. Uses T50 staples (1/4", 5/16", 3/8", 1/2", 17/32" and 9/16"). Comes with replacement oil and 2 hexagonal wrenches. 3-year warranty.

Type :Pneumatic
Pressure :120 PSI
Fastener Length :Uses T50 staples (1/4", 5/16", 3/8", 1/2", 17/32" and 9/16")
Included :Replacement oil and 2 hexagonal wrenches
Warranty :3-year
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Pneumatic Staple 120 PSI - T50 is rated 4.6 out of 5 by 731.
Rated 5 out of 5 by from Best Little Stapler I went searching for a stapler to upholster marine plywood with a 3/8 stainless staple. I tried every electric one available with no success of driving the staple flush.. With 120 pounds of air pressure it buried the staple in everything I tried it on.. I ended knocking back the regulator to 75 pounds to set it where needed. This never missed a hit, was easy to load, light , use very little air and had a handy storage case. The only drawback was getting used to where the safety plunger was in relation to where the staple exited the gun. Many times I was trying to lay a staple in close quarters, , just a little practice…
Date published: 2013-10-25
Rated 4 out of 5 by from tricky tricky At first this unit worked perfectly, fired a strip of 80 staples no problem, then it began misfiring as i became more comfortable with it. the firing pin wouldn't fully retract and feed another staple causing it to simply dry fire, i tried cycling the loading spring and oiling the pin itself but none of this helped. soon i discovered what the problem was, picking the nose off the work before allowing the air to finish venting. For some reason that lets the pin fully retract and not get stuck. After pausing for a moment after each shot before lifting the tip off the work it fired flawlessly through multiple rows of staples ( about 500 in one go ) while stapling insulation. i would recommend this staple gun, at around $30 its cheaper than my electric staple gun and is much more powerful. they just need to work on the return of the firing pin so you can properly use the bump fire feature.
Date published: 2015-10-19
Rated 4 out of 5 by from Easy to use We got this tool expecting it to be easier to work with than the hammer-type or squeeze-handle type since we are stapling overhead. It met that expectation with flying colors - and it is fast as well. The problem we have with the thing is the spring that feeds the staples - so far we have had to take it apart twice to hook the spring loops back onto the little retainer hooks.
Date published: 2014-07-06
Rated 4 out of 5 by from Best Value for Price We were thoroughly impressed by this staple gun and made installing insulation a breeze! For the price of the gun, I was expecting something to go wrong with it soon after first use, but alas it has proven me wrong. I would highly recommend this product to someone is on a budget but still looking for a quality product.
Date published: 2014-01-31
Rated 5 out of 5 by from bought to help install insulation. easy to use and load, light weight and gets the job done.
Date published: 2013-10-16
Rated 5 out of 5 by from Good tool Purchased this stapler to attach chicken fence to the fence frame. Used two boxes of staples so far (2500). On time the hammer stuck, probably because I failed to oil the stapler. After oiling, it worked fine. A few staples collapsed, maybe a dozen. Sets 1/2 and 9/16 staples in pine at 80 psi with 200 feet of air hose. Light and easy to handle.
Date published: 2015-09-19
Rated 3 out of 5 by from Light weight and easy to use Staples jam when used for longer periods of time or when firing quickly. There are no Manuel adjustments on the stapler gun for adjusting the depth that the staple penetrates. You have to adjust the depth by backing off on the psi of the compressor. I used it for light weight upholstery project and it was adequate but not outstanding. The price point was a little high for the quality of the product. It is light and easy to use for a woman. I think the ergonomics could be improved for less stress on the muscles in the palm and wrist and for that reason I will be looking at other staple guns for future upholstery projects that are more indepth
Date published: 2015-04-02
Rated 4 out of 5 by from Rare Find - Perfect Tool This stapler is not the common narrow crown type. The wider crown makes it perfect for screen projects. The wider crown provides plenty of gripping of the screen fabric which in turn makes an excellent and tight installation. The only alternative was a manual stapler which was not suitable for the project the size of a screened porch. No jams, no miss fires. One annoyance, the rubber tip came off very easily and the stapler would not fire without it. Finding that tip on the ground was not easy. Suggest that a snap-in or locking design be develope to keep the rubber / plastic tip captive. [This review was collected as part of a promotion.]
Date published: 2019-07-27
  • y_2020, m_1, d_28, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.4
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_731
  • loc_en_CA, sid_00125088, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_ace_ca
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms