Hammer Drill Driver Kit 1/2" - VSR - Lithium-Ion 20V Max

With its 3-speed all-metal transmission, the DCD985M2 Dewalt hammerdrill is designed for fastest application speed and improved run time. The 22 clutch settings allows for regular and precise results, and the heavy duty 1/2 in metal ratcheting chuck with carbine inserts provides superior bit gripping strength. Equipped with a LED light with 20 second delay after trigger release, this tool illuminates your working area. The kit includes a 1-hour charger, 2 Lithium-Ion 20V Max XR battery packs, a 360-degree side handle and a storage case. Three-year limited warranty.

Voltage :20 V
Power Source :Battery
Type :Cordless
Color :Yellow/black
Amperage :4 A
Wattage :80 W
Revolutions per Minute :0-575 / 0-1350 / 0-2000 rpm
Drilling Capacity :2'' on wood, 1/2'' on metal
Charge Time :1 h
Chuck :1/2" - ratcheting
Clutch Setting :22
Battery Type :Lithium-ion 20V Max
Speed :3 speeds
Included :1-hour charger, 2 Lithium-Ion 20V Max XR battery packs, 360° side handle, storage case
Warranty :3-year limited warranty, 1-year free service contract, 90-day money-back guarantee
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 0ms
  • QUESTIONS, PRODUCT
  • bvseo-msg: The resource to the URL or file is currently unavailable.;
Hammer Drill Driver Kit 1/2" - VSR - Lithium-Ion 20V Max is rated 4.2 out of 5 by 9.
Rated 5 out of 5 by from Very reliable, liked my first one enough to buy a. I have owned two of these over the last few years and never had any problems with either of them. The batteries could sit on a shelf and hold a charge longer than any other battery operated tool I’ve ever owned. My personal experience with this drill kit was good all the way around. Whenever I was finished using the drill I would recharge the batteries before putting them away and not once were the batteries dead even after sitting unused for well over a month. The convenience of a drill like this made so many jobs a little easier and a little faster. I would recommend this without hesitation. [This review was collected as part of a promotion.]
Date published: 2019-11-06
Rated 4 out of 5 by from Good Drill I have only used this drill a few times and it seems to work well & has plenty of power. This drill is heavy and probably not the best choice for the occasional home use, however if you need a drill that has plenty of torque this would be a good choice.
Date published: 2015-04-20
Rated 4 out of 5 by from Great drill--EXCEPT for the chuck As with my other DeWalt 20V MAX tools, I am pleased with this tool overall. It is powerful, balanced well with the 4aH battery installed, easy to adjust clutch, forward/reverse switch easy to push, and made from the same tough reinforced plastic of the rest of the line. Only two complaints: 1.The key-less chuck is the most serious issue. It fails to live up to the tools otherwise quality standard. The chuck is rather cheaply made, allows drills to slip, (ruining the shank of expensive drill bits with a gouge or burr) or worse, allowing the bit to fly out of the chuck when you release the trigger and self-braking effect of the tool stops the chuck rapidly. You also need to be careful when tightening the chuck with bare hands, (as most do in construction). The lightly knurled metal outer portion you grip will yield a nice "friction burn" if you grip it hard to tighten larger bits. The drill is very powerful. And you DO need to grip it hard to tighten down on larger bits to prevent the above issue. (I took this tool back and exchanged it for another, since I thought it might be a defective chuck. The second tool had the exact same issue). 2. This drill, and many others, also need the small rubberized pads on each side, (like on the impact driver drills), to prevent the tool from slipping on angled surfaces like roofs, etc. I'm giving this 4 stars only because of the chuck, (which is a very important part of the tool). Overall, a very good tool if the chuck issue was addressed.
Date published: 2018-07-18
Rated 2 out of 5 by from Chuck piled up one year after purchase The Chuck on this drill failed after about a year on the job, ceased to be able to adjust tines to grab drill bit. Disappointed a quality tool manufacturer like DeWalt cannot produce a power tool line durable enough to last especially For the price of this kit.
Date published: 2018-02-09
Rated 4 out of 5 by from Good drill The only problem I've encountered with this drill, is that it doesn't always hold the bit securely. Other than that, it works great.
Date published: 2018-02-11
Rated 5 out of 5 by from Works great for residential plumbing This thing flies through 1-3/8 holes with a self fed bit! It will also handle 2 9/16 in torque mode with little more trouble than an angle drill. Very impressed! [This review was collected as part of a promotion.]
Date published: 2019-11-04
Rated 5 out of 5 by from Works great for residential plumbing This thing flies through 1-3/8 holes with a self fed bit! It will also handle 2 9/16 in torque mode with little more trouble than an angle drill. Very impressed! [This review was collected as part of a promotion.]
Date published: 2019-11-04
Rated 5 out of 5 by from Variable speed Love the speed settings in these drills. Helps keep from stripping door hinge screws! Awesome drill overall [This review was collected as part of a promotion.]
Date published: 2019-11-08
  • y_2019, m_12, d_4, h_12
  • bvseo_bulk, prod_bvrr, vn_bulk_3.0.3
  • cp_1, bvpage1
  • co_hasreviews, tv_0, tr_9
  • loc_en_CA, sid_00275697, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
  • clientName_ace_ca
  • bvseo_sdk, java_sdk, bvseo-4.0.0
  • LOCAL, getContent, 1ms
  • REVIEWS, PRODUCT